For Rent: Hydraulic Pile Load Testing Systems
Rent a complete hydraulic pile load testing system for controlled static load testing up to 665 tons
CH Bull configures pile testing systems around your required load, cylinder stroke, reaction-frame setup, and monitoring needs.
Pile Load Testing System Capabilities
CH Bull can configure hydraulic pile load testing systems around the capacity, control, and monitoring requirements of your test.
UP TO 665-TON CAPACITY
High-capacity hydraulic systems can be configured for demanding static pile load tests.
CONTROLLED LOADING & UNLOADING
Apply, maintain, and reduce hydraulic load in controlled increments throughout the test.
LOAD MONITORING OPTIONS
Monitor hydraulic pressure or add a load cell for independent verification of applied force.
How the AW-100 System Works
At the heart of many CH Bull pile testing systems is the AW-100 air-over-hydraulic pump, designed to provide controlled hydraulic pressure up to 10,000 PSI and maintain pressure for extended periods.
The pump operates at approximately a 100:1 air-to-hydraulic pressure ratio. For example, 10 PSI of regulated air pressure produces approximately 1,000 PSI of hydraulic pressure, allowing load to be increased gradually during the test.
If the pile moves under load, the pump continues supplying hydraulic oil as the cylinder extends, helping maintain the selected pressure. An adjustable pressure relief valve allows pressure to be reduced in controlled increments during unloading.
A Typical System Can Include
AW-100 Pump Features
10-Gallon Reservoir
Provides hydraulic fluid capacity for extended testing.
0–10,000 PSI Relief Valve
Allows controlled pressure adjustment and unloading.
Four-Way Control Valve
Controls hydraulic flow through the system.
Air Filter & Precision Regulator
Helps provide clean, controlled air pressure to the pump.
Why Rent from CH Bull
Right System for the Test
We help determine the appropriate capacity, cylinder stroke, pump, and system configuration based on your project requirements.
Ready-to-Use Equipment
Rental equipment is maintained, tested, and prepared before it is sent to the jobsite.
Complete Rental Systems
Get the pump, cylinder, spherical bearing, hoses, monitoring equipment, and other required hydraulic components from one source.
Heavy-Lift Hydraulic Experience
CH Bull has decades of experience supporting high-pressure hydraulic and heavy-load applications.
Need a Pile Load Testing System?
Tell CH Bull your required test load, stroke, reaction-frame arrangement, and monitoring requirements. We’ll help configure the right rental system.