For Rent: Hydraulic Jacking Accessories & Manifolds
Complete your hydraulic jacking system with manifolds, hoses, gauges, and high-pressure accessories configured for easy field assembly
CH Bull rental accessories use a standardized quick-disconnect system, making it easier to connect pumps, cylinders, manifolds, gauges, and hoses for anything from a single jack to a multi-point lift.
Hydraulic Jacking Accessory Options
CH Bull can configure the accessories needed to connect, control, and monitor your hydraulic jacking system.
2-, 4-, 6- & 10-Port Manifolds
Operate multiple hydraulic cylinders from a common pump with individual or combined cylinder control.
High-Pressure Hydraulic Hoses
Choose from hose lengths ranging from 6 to 100 feet for compact setups or larger lifting systems.
Hydraulic Pressure Gauges
Add 2½-inch, 4-inch, or 6-inch gauges where pressure monitoring is needed throughout the system.
Built for Flexible Multi-Jack Control
CH Bull pressure manifolds allow multiple hydraulic cylinders to operate from a common pump while still providing control at individual lifting points.
Each cylinder circuit includes its own shutoff valve and one-way check valve, allowing operators to isolate a cylinder or operate multiple cylinders together.
Depending on the manifold configuration, systems can support 2, 4, 6, or 10 hydraulic circuits, making them well suited for multi-point lifting applications where individual jack locations may require adjustment during the lift.
Easy Quick-Disconnect Connections
CH Bull standardizes its rental equipment around high-pressure quick disconnects:
- Pumps, cylinders, and manifolds use female high-pressure quick disconnects
- Hydraulic hoses use male quick couplers
- Gauges and additional components can be added as needed
This modular arrangement makes it easier to assemble, expand, or modify a hydraulic system in the field without rebuilding the hydraulic circuit with individual pipe fittings.
Hoses & Pressure Monitoring
High-Pressure Hydraulic Hoses
Available rental hose lengths include:
6 ft. · 10 ft. · 15 ft. · 25 ft. · 30 ft. · 50 ft. · 80 ft. · 100 ft.
CH Bull rental hoses are pre-filled with hydraulic oil and tested to 10,000 PSI before being placed into service. Pre-filling helps reduce the amount of air introduced during field assembly and makes setup easier.
Hydraulic Gauges
Pressure gauges can be installed at the manifold or other appropriate locations to monitor system or individual circuit pressure.
Available gauge sizes include:
2½ in. · 4 in. · 6 in.
Why Rent from CH Bull
Configured for Your System
CH Bull can help determine the appropriate manifolds, hoses, gauges, and connections for your jacking setup.
Easy Field Assembly
Standardized high-pressure quick disconnects make components easier to connect, add, or reposition at the jobsite.
Complete Rental Systems
Get the manifolds, hoses, gauges, pumps, cylinders, and other hydraulic components needed for your jacking system from one source.
Tested Rental Equipment
Hoses, manifolds, and related high-pressure components are tested before being returned to the rental fleet.
Need Hydraulic Jacking Accessories?
Tell CH Bull about your pump, cylinders, number of lifting points, hose requirements, and monitoring needs. We’ll help configure the accessories for your hydraulic jacking system.