K1500SP_Sectional_Machine_72dpi.jpg

Click to view Operator’s Manual

Click to view Parts List

For 2″ (50 mm) to 10″ (250 mm) Drain and Sewer Lines

FEATURES –

  • The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster…better.
  • Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 600 RPM Release handle, cable stops instantly
  • Wheels to the job site – sets up fast, cleans up fast.
  • Equipped to run, easy to handle, 15-foot (4,6 m) sections of 1 1⁄4″ (32 mm) cable to clean 3″ (75 mm) to 10″ (250 mm) lines to 300′ (91 m).
  • Easy clutch jaw change-out adapts K-1500 to run 15-foot (4,6 m) sections of 7⁄8″ (22 mm) cable through 2″ (50 mm) to 4″ (110 mm) lines up to 175′ (53 m).
  • Equipped with full 1500W motor and heavy-duty rotary switch.
  • 10″ solid ball bearing wheels.
  • Low profile frame design will fit most crawl spaces
  • Includes A-1 RIDGID drain cleaning mitt and operators manual
  • Approved by CSA to CSA and UL Standards (115V only)


    Click to view Operator’s Manual

    Click to view Parts List

    For 2″ (50 mm) to 10″ (250 mm) Drain and Sewer Lines

    FEATURES –

  • The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster…better.
  • Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle down and cable spins at 600 RPM Release handle, cable stops instantly
  • Wheels to the job site – sets up fast, cleans up fast.
  • Equipped to run, easy to handle, 15-foot (4,6 m) sections of 1 1⁄4″ (32 mm) cable to clean 3″ (75 mm) to 10″ (250 mm) lines to 300′ (91 m).
  • Easy clutch jaw change-out adapts K-1500 to run 15-foot (4,6 m) sections of 7⁄8″ (22 mm) cable through 2″ (50 mm) to 4″ (110 mm) lines up to 175′ (53 m).
  • Equipped with full 1500W motor and heavy-duty rotary switch.
  • 10″ solid ball bearing wheels.
  • Low profile frame design will fit most crawl spaces
  • Includes A-1 RIDGID drain cleaning mitt and operators manual
  • Approved by CSA to CSA and UL Standards (115V only)


    Machine Options – B Frame –

    Catalog Number
    Model No.
    		 Description
    Voltage (V)
    Weight
    lb.
    kg
    K-1500SP 
    		 120V-60Hz Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose 
    115 
    141 
    64 
    K-1500SP 
    		 120V-60Hz Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose, A-34-12 Rear Guide Hose, 150 Feet, Ten Sections of C-11, 1 1/4" Cable, Three A-8 Cable Carriers, A-3 Tool Box, Eight-Piece 1 1/4" Tool Package 
    115 
    317 
    144 
    K-1500SPB 
    		 120V-60Hz Machine with A-1 RIDGID Drain Cleaning Mitt and A-12 Pin Key Plus : – A-34-12 Rear Guide Hose – C-14 Three Carrier Cable Combination Kit 
    115 
    297 
    135 
    K-1500SP 
    		 220/240V-50Hz Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose 
    115 
    141 
    64 

    Machine Options – A Frame –

    Catalog Number
    Model No.
    		 Description
    Voltage (V)
    Weight
    lb.
    kg
    K-1500SPA 
    		 120V Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose 
    115 
    150 
    68 
    46902
    K-1500SPA 
    		 120V Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose, A-34-12 Rear Guide Hose, 150 Feet, Ten Sections of C-11, 1 1/4" Cable, Three A-8 Cable Carriers, A-3 Tool Box, Eight-Piece 1 1/4" Tool Package 
    115 
    326 
    148 
    K-1500SPA 
    		 120V Machine with A-1 Operator’s Mitt and A-12 Pin Key, Plus: A-34-12 Rear Guide Hose & C-14 Three Carrier Cable Combination Kit 
    115 
    317 
    144 
    43517
    – 
    – 
    – 

    Cables and Leaders –

    Catalog Number
    Model No.
    		 Description
    Weight
    lb.
    kg
    C-11 PC 
    		 15′ (4,6 m) Standard All- Purpose Wind 3/8" Pitch w/ Plastic Core, Good For 4" Traps 
    17 3/5 
    8.0 
    C-10 PC 
    		 7/8" (22 mm) x 15′ Cable with Inner Core (4,6 m)
    10 
    4.5 
    		Requires A-368-X Jawset  
    C-10 
    		 7/8" (22 m) x 15′ (4,6 m) All- Purpose Wind
    9 1/2 
    4.3 
    		Requires A-368-X Jawset  
    C-11 
    		 1 1/4" (32 mm) x 15′ (4,6 m) Standard All-Purpose Wind. 3/8" (10 mm) Pitch. Good for 4" (110 mm) Traps, 3" (75 mm) – 8" (200 mm) Lines 
    16 
    7.3 
    C-12 
    		 1 1/4" (32 mm) x 15′ (4,6 m) Extra-Heavy- Duty Wind. 3/8" (10 mm) Pitch. Recommended For 4" (110 mm) – 10" (250 mm) Long Runs, No 4" (110 mm) Traps 
    19 
    8.6 
    C-14 
    		 1 1/4" (32 mm) x 15′ (4,6) Extra-Flexible Wind. 1/2" (13 mm) Pitch. Recommended For 3" (75 mm) – 10" (250 mm) Lines Through Cleanout, No 4" (110 mm) Traps 
    16 
    6.8 
    C-15 
    		 15′ (4,6) Extra-Flexible Wind. 1/2" (13 mm) Pitch. Recommended For 3" (75 mm) – 6" (150 mm) Lines Good for Traps 
    12 
    5.5 
    63090
    T-27 
    		 1 1/4" (32 mm) x 25" (63,5 cm) Leader 
    2 3/4 
    1.2 

    Cable Kits and Tool Kit –

    Catalog Number
    Model No.
    		 Description
    Weight
    lb.
    kg
    A-62 
    		 Standard Equipment Tool Kit for K-60-SE, includes: –T-101 Straight Auger –T-102 Funnel Auger –T-107 Spade Cutter –T-125 Retrirving Auger –T-150-1 Sharktooth Cutter –A-3 Tool Box –A-12 Pin Key 
    43 
    19.5 
    61630
    A-61 
    		 Standard Equipment Cable Kit for K-60-SE, includes: – Five Sections C-10, 7/8" (22 mm) x 15′ (4,6 m) Cable – A-8 Cable Carrier 
    8 
    3.6 

    C-14 Heavy-Duty Accessory Kit –

    Catalog Number
    Model No.
    		 Description
    Weight
    lb.
    kg
    		C-14 Three-Carrier Cable Combination Kit Includes: 150′ C-14 Cable, Ten Sections 1 1/4", Three Cable Carriers, A-3 Toolbox and A-12 Pin Key, T-2 HD Straight Auger; T-4 HD Funnel Auger; T-6 Funnel Retrieving Auger; T-8 Spade Cutter; T-13 Saw Tooth Cutters; T-50 Sharktooth 
    160 
    72.60 

    Accessories –

    Catalog Number
    Model No.
    		 Description
    Weight
    lb.
    kg
    A-8 
    		 Cable Carrier 60′ (18 m) Capacity 1 1/4" (32 mm) 
    5 1/2 
    2.5 
    A-9 
    		 Cable Carrier 150-Foot (45,7) Capacity 11/4" (32 mm) 
    14 
    6.4 
    A-34-10 
    		 10-Foot (3,1 m) Rear Guide Hose 
    13 3/8 
    6.2 
    A-34-12 
    		 12-Foot (3,7 m) Rear Guide Hose 
    20 
    9.1 
    A-34-16 
    		 16-Foot (4,9 m) Rear Guide Hose 
    26 1/2 
    12.0 
    A-20 
    		 8-Foot (2,4 m) Front Guide Hose Assembly 
    25 
    11.4 
    A-1 
    		 Left-Hand RIDGID Drain Cleaning Mitt 
    1/2 
    0.2 
    A-2 
    		 Right-Hand RIDGID Drain Cleaning Mitt 
    1/2 
    0.2 
    A-1HD 
    		 Heavy-Duty Left-Hand RIDGID Drain Cleaning Mitt 
    1/2 
    0.2 
    A-2HD 
    		 Heavy-Duty Right-Hand RIDGID Drain Cleaning Mitt 
    1/2 
    0.2 
    A-3 
    		 Tool Box 
    5 
    2.3 
    A-12 
    		 Coupling Pin Key 
    1/2 
    0.2 
    A-4 
    		 Trap Spoon (30", 76 cm) 
    1 3/4 
    0.8 
    A-17 
    		 Manhole Guide Pipe 
    23 
    10.4 
    59320
    A-369X 
    		 1 1/4" (32 mm) Replacement Jawset 
    3/4 
    0.3 
    59325
    A-368X 
    		 7/8" Jaw Set 
    3/4 
    0.3 

    Tools –

    Catalog Number
    Model No.
    		 Description
    Replac. Blade(s)
    T-11 
    		 “H” Cutter, 2 1/2" (65 mm) 
    T-12 
    		 “H” Cutter, 3 1/2" (89 mm) 
    T-21 
    		 Spiral Sawtooth Cutter, 2 1/2" (65 mm) 
    T-24 
    		 4-Blade Cutter, 21/2" (65 mm) 
    T-25 
    		 4-Blade Cutter, 3 1/2" (89 mm) 
    T-26 
    		 4-Blade Cutter, 4 1/2" (114 mm) 
    T-26A 
    		 4-Blade Cutter, 5 1/2" (140 mm) 
    T-15A 
    		 Expanding Cutter, 4" – 6" (110-150 mm) 
    T-4 
    		 Heavy-Duty Funnel Auger 
    – 
    T-2 
    		 Heavy-Duty Straight Auger 
    – 
    T-15B 
    		 Expanding Cutter, 6" – 8" (150-200 mm) 
    T-17 
    		 Spiral Bar Cutter, 6" (150 mm) 
    T-18 
    		 Spiral Bar Cutter, 8" (200 mm) 
    T-16 
    		 Spiral Bar Cutter, 4" (110 mm) 
    T-13 
    		 Sawtooth Cutter, 2 1/2" (65 mm) 
    T-1 
    		 Straight Auger 
    – 
    T-10 
    		 Grease Cutter, 4 1/2" (114 mm) 
    T-22 
    		 Spiral Sawtooth Cutter, 3" (75 mm) 
    T-23 
    		 Spiral Sawtooth Cutter, 4" (110 mm) 
    T-3 
    		 Funnel Auger 
    – 
    T-31 
    		 Chain Knocker, For 3"- 4" Pipe (75-110 mm) 
    T-32 
    		 Chain Knocker, For 6" Pipe (150 mm) 
    T-33 
    		 Chain Knocker, For 8" Pipe (200 mm) 
    T-38 
    		 Flue Brush, 1 1/2" (40 mm) 
    – 
    T-39 
    		 Flue Brush, 2" (50 mm) 
    – 
    T-40 
    		 Flue Brush, 2 1/2" (65 mm) 
    – 
    T-41 
    		 Flue Brush, 3" (76 mm) 
    – 
    T-42 
    		 Flue Brush, 3 1/2" (89 mm) 
    – 
    T-43 
    		 Flue Brush, 4" (110 mm) 
    – 
    T-44 
    		 Flue Brush, 4 1/2" (114 mm) 
    – 
    T-46 
    		 Flue Brush, 5 1/2" (140 mm) 
    – 
    T-47 
    		 Flue Brush, 6" 
    – 
    T-5 
    		 Straight Retrieving Auger 
    – 
    T-6 
    		 Funnel Retrieving Auger Run Machine In Reverse 
    – 
    T-7 
    		 Hook Auger 
    – 
    T-8 
    		 Grease Cutter, 2 1/2" (65 mm) 
    T-9 
    		 Grease Cutter, 3 1/2" (89 mm) 
    T-45 
    		 Flue Brush, 5" (127 mm) 
    – 
    T-50 
    		 Includes 3 Sizes: 3-4-5" (75-110-127 mm) 
    – 
    T-50-1 
    		 Sharktooth Cutter, 3" (75 mm) 
    T-50-2 
    		 Sharktooth Cutter, 4" (110 mm) 
    T-50-3 
    		 Sharktooth Cutter, 5" (127 mm)