K1500B_Sectional_Machine_72dpi.jpg

Click to view Operator’s Manual

Click to view Parts List

For 2″ to 8″ (50-200mm) Drain and Sewer Lines

Features –

  • The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster…better.
  • Wheels to the job site – sets up fast, cleans up fast.
  • Low-profile “B” frame design will fit most crawl spaces, loads and unloads from truck easily. Upright “A” frame features cable carrier storage during transport, ideal for in-house applications.
  • Equipped to run, easy to handle, 15-foot sections of 1 1/4″ cable to clean 3″ to 8″ (32m-200mm) lines to 200 feet (61m).
  • Easy clutch jaw change-out adapts K-1500 to run 15-foot sections of 7/8″ (4.6/22mm) cable through 2″ to 4″ lines up to 175 feet (50-100mm, 53m).
  • Equipped with 3/4 HP motor; 115V Models.
  • CSA approved.
  • Approved to UL standards (NRTLC).


    Click to view Operator’s Manual

    Click to view Parts List

    For 2″ to 8″ (50-200mm) Drain and Sewer Lines

    Features –

  • The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages – indoors or out. High-speed cleaning gets the job done faster…better.
  • Wheels to the job site – sets up fast, cleans up fast.
  • Low-profile “B” frame design will fit most crawl spaces, loads and unloads from truck easily. Upright “A” frame features cable carrier storage during transport, ideal for in-house applications.
  • Equipped to run, easy to handle, 15-foot sections of 1 1/4″ cable to clean 3″ to 8″ (32m-200mm) lines to 200 feet (61m).
  • Easy clutch jaw change-out adapts K-1500 to run 15-foot sections of 7/8″ (4.6/22mm) cable through 2″ to 4″ lines up to 175 feet (50-100mm, 53m).
  • Equipped with 3/4 HP motor; 115V Models.
  • CSA approved.
  • Approved to UL standards (NRTLC).


    Machine Options – A Frame:

    Catalog Number
    Model No.
    		 Description
    Voltage (V)
    Weight
    lb.
    kg
    K-1500A 
    		 Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose 
    115 
    135 
    61.30 
    K-1500A 
    		 Machine with A-1 Mitt, A-12 Pin Key,and A-34-12 Rear Guide Hose, Plus: Seven Sections 1 1/4" (C-14) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set  *
    115 
    256 
    116.10 
    K-1500A 
    		 Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 1 1/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set  *
    115 
    256 
    116.10 
    K-1500A 
    		 Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 1 1/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4" Tool Set  *
    220 
    256 
    116.10 
    K-1500A 
    		 Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose 
    220 
    135 
    61.30 

    Machine Options – B Frame:

    Catalog Number
    Model No.
    		 Description
    Voltage (V)
    Weight
    lb.
    kg
    K-1500B 
    		 Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose 
    115 
    135 
    61.3 
    K-1500B 
    		 Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-14) Cable Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set 
    115 
    256 
    116.1 
    K-1500B 
    		 Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set 
    115 
    256 
    116.1 
    K-1500B 
    		 Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set 
    220 
    256 
    116.1 
    K-1500B 
    		 Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose 
    220 
    135 
    61.3 
    K-1500B 
    		 Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set 
    220 
    256 
    116.1 
    		K-1500B Special Kit 
    220 
    210 
    95

    Cables and Leaders –

    Catalog Number
    Model No.
    		 Description
    Weight
    lb.
    kg
    C-11 PC 
    		 15′ (4,6 m) Standard All- Purpose Wind 3/8" Pitch w/ Plastic Core, Good For 4" Traps 
    17 3/5 
    8.0 
    C-10 PC 
    		 7/8" (22 mm) x 15′ Cable with Inner Core (4,6 m) – Requires A-368-X Jawset  
    10 
    4.5 
    C-10 
    		 7/8" (22 m) x 15′ (4,6 m) All- Purpose Wind – Requires A-368-X Jawset  
    9 1/2 
    4.3 
    C-11 
    		 1 1/4" (32 mm) x 15′ (4,6 m) Standard All-Purpose Wind. 3/8" (10 mm) Pitch. Good for 4" (110 mm) Traps, 3" (75 mm) – 8" (200 mm) Lines 
    16 
    7.3 
    C-12 
    		 1 1/4" (32 mm) x 15′ (4,6 m) Extra-Heavy- Duty Wind. 3/8" (10 mm) Pitch. Recommended For 4" (110 mm) – 10" (250 mm) Long Runs, No 4" (110 mm) Traps 
    19 
    8.6 
    C-14 
    		 1 1/4" (32 mm) x 15′ (4,6) Extra-Flexible Wind. 1?2" (13 mm) Pitch. Recommended For 3" (75 mm) – 10" (250 mm) Lines Through Cleanout, No 4" (110 mm) Traps 
    16 
    6.8 
    C-15 
    		 15′ (4,6) Extra-Flexible Wind. 1/2" (13 mm) Pitch. Recommended For 3" (75 mm) – 6" (150 mm) Lines Good for Traps 
    12 
    5.5 
    63090
    T-27 
    		 1 1/4" (32 mm) x 25" (63,5 cm) Leader 
    2 3/4 
    1.2 

    Cable Kits –

    Catalog Number
    Model No.
    		 Description
    Weight
    lb.
    kg
    A-62 
    		 Standard Equipment Tool Kit for K-60-SE, includes: –T-101 Straight Auger –T-102 Funnel Auger –T-107 Spade Cutter –T-125 Retrirving Auger –T-150-1 Sharktooth Cutter –A-3 Tool Box –A-12 Pin Key 
    43 
    19.50 
    61630
    A-61 
    		 Standard Equipment Cable Kit for K-60-SE, includes: – Five Sections C-10, 7/8" (22 mm) x 15′ (4,6 m) Cable – A-8 Cable Carrier 
    8 
    3.60 

    Accessories –

    Catalog Number
    Model No.
    		 Description
    Weight
    lb.
    kg
    A-1 
    		 Left-Hand RIDGID Drain Cleaning Mitt 
    1/2 
    0.2 
    A-2 
    		 Right-Hand RIDGID Drain Cleaning Mitt 
    1/2 
    0.2 
    A-12 
    		 Coupling Pin Key 
    1/2 
    0.2 
    A-17 
    		 Manhole Guide Pipe 
    23 
    10.4 
    A-20 
    		 8-Foot (2,4 m) Front Guide Hose Assembly 
    25 
    11.4 
    59320
    A-369X 
    		 1 1/4" (32 mm) Replacement Jawset 
    3/4 
    0.3 
    59325
    A-368X 
    		 7/8" Jaw Set 
    3/4 
    0.3 
    A-3 
    		 Tool Box 
    5 
    2.3 
    A-34-12 
    		 12-Foot (3,7 m) Rear Guide Hose 
    20 
    9.1 
    A-34-16 
    		 16-Foot (4,9 m) Rear Guide Hose 
    26 1/2 
    12.0 
    A-34-10 
    		 10-Foot (3,1 m) Rear Guide Hose 
    13 3/8 
    6.2 
    A-4 
    		 Trap Spoon (30", 76 cm) 
    1 3/4 
    0.8 
    A-8 
    		 Cable Carrier 60′ (18 m) Capacity 1 1/4" (32 mm) 
    5 1/2 
    2.5 
    A-9 
    		 Cable Carrier 150-Foot (45,7) Capacity 11/4" (32 mm) 
    14 
    6.4 
    A-1HD 
    		 Heavy-Duty Left-Hand RIDGID Drain Cleaning Mitt 
    1/2 
    0.2 
    A-2HD 
    		 Heavy-Duty Right-Hand RIDGID Drain Cleaning Mitt 
    1/2 
    0.2 

    Tools –

    Catalog Number
    Model No.
    		 Description
    Replac. Blade(s)
    T-11 
    		 “H” Cutter, 2 1/2" (65 mm) 
    T-12 
    		 “H” Cutter, 3 1/2" (89 mm) 
    T-15A 
    		 Expanding Cutter, 4" – 6" (110-150 mm) 
    T-4 
    		 Heavy-Duty Funnel Auger 
    – 
    T-2 
    		 Heavy-Duty Straight Auger 
    – 
    T-15B 
    		 Expanding Cutter, 6" – 8" (150-200 mm) 
    T-13 
    		 Sawtooth Cutter, 2 1/2" (65 mm) 
    T-14 
    		 Sawtooth Cutter, 3 1/2" (89 mm) 
    T-1 
    		 Straight Auger 
    – 
    T-10 
    		 Grease Cutter, 4 1/2" (114 mm) 
    T-3 
    		 Funnel Auger 
    – 
    T-5 
    		 Straight Retrieving Auger 
    – 
    T-6 
    		 Funnel Retrieving Auger Run Machine In Reverse 
    – 
    T-7 
    		 Hook Auger 
    – 
    T-8 
    		 Grease Cutter, 2 1/2" (65 mm) 
    T-9 
    		 Grease Cutter, 3 1/2" (89 mm) 
    T-21 
    		 Spiral Sawtooth Cutter, 2 1/2" (65 mm) 
    T-24 
    		 4-Blade Cutter, 21/2" (65 mm) 
    T-25 
    		 4-Blade Cutter, 3 1/2" (89 mm) 
    T-26 
    		 4-Blade Cutter, 4 1/2" (114 mm) 
    T-26A 
    		 4-Blade Cutter, 5 1/2" (140 mm) 
    T-17 
    		 Spiral Bar Cutter, 6" (150 mm) 
    T-18 
    		 Spiral Bar Cutter, 8" (200 mm) 
    T-16 
    		 Spiral Bar Cutter, 4" (110 mm) 
    T-22 
    		 Spiral Sawtooth Cutter, 3" (75 mm) 
    T-23 
    		 Spiral Sawtooth Cutter, 4" (110 mm) 
    T-31 
    		 Chain Knocker, For 3"- 4" Pipe (75-110 mm) 
    T-32 
    		 Chain Knocker, For 6" Pipe (150 mm) 
    T-33 
    		 Chain Knocker, For 8" Pipe (200 mm) 
    T-38 
    		 Flue Brush, 1 1/2" (40 mm) 
    – 
    T-39 
    		 Flue Brush, 2" (50 mm) 
    – 
    T-40 
    		 Flue Brush, 2 1/2" (65 mm) 
    – 
    T-41 
    		 Flue Brush, 3" (76 mm) 
    – 
    T-42 
    		 Flue Brush, 3 1/2" (89 mm) 
    – 
    T-43 
    		 Flue Brush, 4" (110 mm) 
    – 
    T-44 
    		 Flue Brush, 4 1/2" (114 mm) 
    – 
    T-46 
    		 Flue Brush, 5 1/2" (140 mm) 
    – 
    T-47 
    		 Flue Brush, 6" 
    – 
    T-45 
    		 Flue Brush, 5" (127 mm) 
    – 
    T-50 
    		 Includes 3 Sizes: 3-4-5" (75-110-127 mm) 
    – 
    T-50-1 
    		 Sharktooth Cutter, 3" (75 mm) 
    T-50-2 
    		 Sharktooth Cutter, 4" (110 mm) 
    T-50-3 
    		 Sharktooth Cutter, 5" (127 mm)